Aug/2009
C3 RS-1000 OP
6 chirps Car Locator Constant On Under Remote Start
E. ACTIVE ARMING – LOCK & ARM:
1.Press the button on the transmitter.
2.The siren will chirp once and parking light will flash once indicating that the system is now armed. The
vehicle doors will lock upon arming when interfaced with the security system.
AJAR WARNING: If the siren sounds 3 chirps, then you have left a door, trunk, or hood lid ajar.
SILENT ARMING: Spin up the switch to the page 1 and then press the “Silent Arm” button or press the
transmitter and buttons at the same time to arm your security system, no chirp sound will be heard,
arm confirmation will be through the vehicles parking lights only.
SENSOR BY-PASS:
Bypass The Zone 4: Spin up the switch to the page 2 and then
press button 1 or press the button on
the transmitter two times
within 3 seconds. This will arm the security system and by -
the zone 4-shock sensor.
The system will chirp one additional time to confirm the sensor bypass mode was activated. The sensor bypass
feature is programmed to activate for one arming cycle only. The security system will return to normal operation
during the next arming cycle.
HIDDEN ALARM FUNCTION (Silent Alarm): Spin up the switch to page 1 and then
press the “Hidden Alarm” button or press the button first; within 3 seconds press
the button to activate the hidden alarm function. The security system will arm and
with “Hidden Alarm Function”. The siren / horn will be silenced even if the unit is
triggered in the armed status. Notification will only be through the hand held two-way
remote.
F. PASSIVE ARMING (Programming Required)
Active arming / disarming is controlling your security system via the remote transmitter. This security system
is equipped with an optional Passive Arming feature which allows the security system to arm 30 seconds
after the last door is closed. Operation is as follows.
1. Turn the ignition to the “OFF” position and exit the vehicle.
2. After all entrances are closed, the security system LED will flash fast for 30 seconds. If you reopen any
door / hood / trunk, the security system LED will stop flashing. It will begin flashing again once all of the
vehicle entrances are closed.
3. After 30-second timer has elapsed, the security system will automatically “ARM”. The siren will chirp [1]
time and the parking lights will flash [1] time.
PASSIVE ARMING WITH PASSIVE DOOR LOCKING:
The vehicle doors will automatically lock after passive arming cycle has been completed.
PASSIVE ARMING BY-PASS: While the system disarmed, Press the button twice, the security will
respond with [1] chirp and LED will turn “ON”. The security system will remain in this temporary state for as
long as you wish. To exit passive by-pass, press the transmitter or button and the system will return to
normal status.
G. ACTIVE DISARMING – UNLOCK & DISARM:
1. Press button on the transmitter.
(20 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals